Lesson 21: Practice with Pandas solution

(c) 2018 Justin Bois. With the exception of pasted graphics, where the source is noted, this work is licensed under a Creative Commons Attribution License CC-BY 4.0. All code contained herein is licensed under an MIT license.

This document was prepared at Caltech with financial support from the Donna and Benjamin M. Rosen Bioengineering Center.

This lesson was generated from a Jupyter notebook. You can download the notebook here.



In [1]:
import pandas as pd

Pandas can be a bit frustrating during your first experiences with it. In this lesson, we will practice using Pandas. The more and more you use it, the more distant the memory of life without it will become.

The data set

The data set comes from Kleinteich and Gorb, Sci. Rep., 4, 5355, 2014, and was featured in the New York Times. They measured several properties about the tongue strikes of horned frogs. Let's take a look at the data set, which is in the file ~git/data/frog_tongue_adhesion.csv.

In [2]:
!head -20 data/frog_tongue_adhesion.csv

# These data are from the paper,
#   Kleinteich and Gorb, Sci. Rep., 4, 5225, 2014.
# It was featured in the New York Times.
#    http://www.nytimes.com/2014/08/25/science/a-frog-thats-a-living-breathing-pac-man.html
#
# The authors included the data in their supplemental information.
#
# Importantly, the ID refers to the identifites of the frogs they tested.
#   I:   adult, 63 mm snout-vent-length (SVL) and 63.1 g body weight,
#        Ceratophrys cranwelli crossed with Ceratophrys cornuta
#   II:  adult, 70 mm SVL and 72.7 g body weight,
#        Ceratophrys cranwelli crossed with Ceratophrys cornuta
#   III: juvenile, 28 mm SVL and 12.7 g body weight, Ceratophrys cranwelli
#   IV:  juvenile, 31 mm SVL and 12.7 g body weight, Ceratophrys cranwelli
date,ID,trial number,impact force (mN),impact time (ms),impact force / body weight,adhesive force (mN),time frog pulls on target (ms),adhesive force / body weight,adhesive impulse (N-s),total contact area (mm2),contact area without mucus (mm2),contact area with mucus / contact area without mucus,contact pressure (Pa),adhesive strength (Pa)
2013_02_26,I,3,1205,46,1.95,-785,884,1.27,-0.290,387,70,0.82,3117,-2030
2013_02_26,I,4,2527,44,4.08,-983,248,1.59,-0.181,101,94,0.07,24923,-9695
2013_03_01,I,1,1745,34,2.82,-850,211,1.37,-0.157,83,79,0.05,21020,-10239
2013_03_01,I,2,1556,41,2.51,-455,1025,0.74,-0.170,330,158,0.52,4718,-1381
2013_03_01,I,3,493,36,0.80,-974,499,1.57,-0.423,245,216,0.12,2012,-3975

The first lines all begin with # signs, signifying that they are comments and not data. They do give important information, though, such as the meaning of the ID data. The ID refers to which specific frog was tested.

Immediately after the comments, we have a row of comma-separated headers. This row sets the number of columns in this data set and labels the meaning of the columns. So, we see that the first column is the date of the experiment, the second column is the ID of the frog, the third is the trial number, and so on.

After this row, each row represents a single experiment where the frog struck the target. So, these data are already in tidy format. Let's go ahead and load the data into a DataFrame.

In [3]:
# Load the data
df = pd.read_csv('data/frog_tongue_adhesion.csv', comment='#')

# Take a look
df.head()
Out[3]:
date ID trial number impact force (mN) impact time (ms) impact force / body weight adhesive force (mN) time frog pulls on target (ms) adhesive force / body weight adhesive impulse (N-s) total contact area (mm2) contact area without mucus (mm2) contact area with mucus / contact area without mucus contact pressure (Pa) adhesive strength (Pa)
0 2013_02_26 I 3 1205 46 1.95 -785 884 1.27 -0.290 387 70 0.82 3117 -2030
1 2013_02_26 I 4 2527 44 4.08 -983 248 1.59 -0.181 101 94 0.07 24923 -9695
2 2013_03_01 I 1 1745 34 2.82 -850 211 1.37 -0.157 83 79 0.05 21020 -10239
3 2013_03_01 I 2 1556 41 2.51 -455 1025 0.74 -0.170 330 158 0.52 4718 -1381
4 2013_03_01 I 3 493 36 0.80 -974 499 1.57 -0.423 245 216 0.12 2012 -3975

Practice 1: Mastering .loc

Your goal here is to extract certain entries out of the DataFrame.

a) Extract the impact time of all impacts that had an adhesive strength of magnitude greater than 2000 Pa.

b) Extract the impact force and adhesive force for all of Frog II's strikes.

c) Extract the adhesive force and the time the frog pulls on the target for juvenile frogs (Frogs III and IV). Hint: We saw the & operator for Boolean indexing across more than one column. The | operator signifies OR, and works analogously. You could also approach this using the isin() method of a Pandas Series.

Practice 2: Split-Apply-Combine of the frog data set

You'll now practice your split-apply-combine skills.

a) Compute standard deviation of the impact forces for each frog.

b) Compute the coefficient of variation of the impact forces and adhesive forces for each frog.

c) And now, finally.... Compute a DataFrame that has the mean, median, standard deviation, and coefficient of variation of the impact forces and adhesive forces for each frog. After you make this DataFrame, you might want to explore using the pd.melt() function to make it tidy. You can read the documentation and/or ask a TA to help you.