(c) 2016 Justin Bois and Griffin Chure. This work is licensed under a Creative Commons Attribution License CC-BY 4.0. All code contained herein is licensed under an MIT license.
This exercise was generated from a Jupyter notebook. You can download the notebook here.
import re
import bioinfo_dicts
Exercises 2.3 and 2.4 were inspired by Libeskind-Hadas and Bush, Computing for Biologists, Cambridge University Press, 2014.
For all problems except for the git practice, we will work with real data from the Salmonella enterica genome. The section of the genome we will work with is in the file ~git/bootcamp/data/salmonella_spi1_region.fna. I cut it out of the full genome. It contains Salmonella pathogenicity island I (SPI1), which is contains genes for surface receptors for host-pathogen interactions.
If you have not already, finish the practice exercises with git.
This involved making files and doing commits, so there are no real coding solutions. I hope you got it all to work!
There are packages, like Biopython and scikit-bio for processing files you encounter in bioinformatics. In this problem, though, we will work on our file I/O skills.
a) Use command line tools to investigate the FASTA file. You will notice that the first line begins with a >, signifying that the line contains information about the sequence. The remainder of the lines are the sequence itself.
b) Use the file I/O skill you have learned to read in the sequence and store it as a single string with no gaps.
a) A quick look using less indicates that this is a valid FASTA file. I did a quick check to see how many sequences there are by searching for the > symbol using grep.
!grep ">" ../data/salmonella_spi1_region.fna
We see that there is a single record. So, when we read it in, we just need to skip the first line and read on until we get the full record.
b) Because the file is not too big, we can just read it all in at once. We can then find the first newline character to trim off the first line, which is the description text. Finally, we just delete all newline characters to get our sequence. (This is just one of many ways to do this.)
# Read all the lines into a list
with open('data/salmonella_spi1_region.fna', 'r') as f:
file_str = f.read()
# Cut off first line, but keep descriptor
descriptor = file_str[:file_str.find('\n')]
file_str = file_str[file_str.find('\n')+1:]
# Eliminate newlines
seq = file_str.replace('\n', '')
# Take a look at the first 500 bases to make sure we got it right.
seq[:500]
Looks good!
Pathogenicity islands are often marked by different GC content than the rest of the genome. We will try to locate the pathogenicity island(s) in our section of the Salmonella genome by computing GC content.
a) Write a function that divides a sequence into blocks and computes the GC content for each block, returning a tuple. The function signature should look like
gc_blocks(seq, block_size)
To be clear, if seq = 'ATGACTACGT' and block_size = 4, the blocks to be considered are
ATGA
CTAC
and the function should return (0.25, 0.5). Note that the blocks are non-overlapping and that we don't bother with the end of the sequence that does not fit completely in a block.
b) Write a function that takes as input a sequence, block size, and a theshold GC content, and returns the original sequence where every base in a block with GC content above threshold is capitalized and every base below the threshold is lowercase. You would call the function like this:
mapped_seq = gc_map(seq, block_size, gc_thresh)
For example,
gc_map('ATGACTACGT', 4, 0.4)
returns 'atgaCTAC'. Note that bases not included in GC blocks are truncated.
c) Use the gc_map() function to generate a GC content map for the Salmonella sequence with block_size = 1000 and gc_thresh = 0.45. Where do you think the pathogenicity island is?
d) Write the GC-mapped sequence (with upper and lower characters) to a new FASTA file. Use the same description line (which began with a > in the original FASTA file), and have line breaks every 60 characters in the sequence.
a) The function is fairly simple. We loop through the sequence with a stride equal to the block size, computing the GC content for each subsequence of that length. We start with a function to compute GC content for a sequence.
def gc_content(seq):
"""GC content of a given sequence"""
seq = seq.upper()
return (seq.count('G') + seq.count('C')) / len(seq)
Next, we write the looping function.
def gc_blocks(seq, block_size):
"""
Divide sequence into non-overlapping blocks
and compute GC content of each block.
"""
blocks = []
for i in range(0, len(seq) - (len(seq) % block_size), block_size):
blocks.append(gc_content(seq[i:i+block_size]))
return tuple(blocks)
b) We just use our already-written gc_content() function to decide how to modify the string of the sequence.
def gc_map(seq, block_size, gc_thresh):
"""Give back seq with lowercase letters where GC content is low."""
out_seq = ''
# Determine GC content of each block and change string accordingly
for i in range(0, len(seq) - (len(seq) % block_size), block_size):
if gc_content(seq[i:i+block_size]) < gc_thresh:
out_seq += seq[i:i+block_size].lower()
else:
out_seq += seq[i:i+block_size].upper()
return out_seq
c) Let's do it for Salmonella!
sal_gcmap = gc_map(seq, 1000, 0.45)
To save on display space, we will not display the sequence here. Scrolling through the GC map file generated in the next part, the pathogenicity island appears to occur about a quarter of the way into this subsequence.
d) To write the file out, we use the fact that we conveniently kept the description text when we parsed the Salmonella FASTA file in the first place. We then just write the sal_gcmap string in blocks of 60. We have to make sure to ge t the last few bases as well.
# Write the result
with open('salmonella_spi1_region_gc_map.fna', 'w') as f:
# Write description text
f.write(descriptor + '\n')
# Write sequence in blocks of 60
i = 0
while i < len(sal_gcmap) - 59:
f.write(sal_gcmap[i:i+60] + '\n')
i += 60
# Write last line
f.write(sal_gcmap[i:])
We'll take a quick look to see it worked out ok.
!head salmonella_spi1_region_gc_map.fna
print('...')
!tail salmonella_spi1_region_gc_map.fna
a) Write a function, longest_orf(), that takes a DNA sequence as input and finds the longest open reading frame (ORF) in the sequence (we will not consider reverse complements). A sequence fragment constitutes an ORF if the following are true.
ATG.TGA, TAG, or TAA.Note that the sequence ATG may appear in the middle of an ORF. So, for example,
GGATGATGATGTAAAAC
has two ORFs, ATGATGATGTAA and ATGATGTAA. You would return the first one, since it is longer of these two.
Hint: The statement for this problem is a bit ambiguous as it is written. What other specification might you need for this function?
b) Use your function to find the longest ORF from the section of the Salmonella genome we are investigating.
c) Write a function that converts a DNA sequence into a protein sequence. The dictionaries in the bioinfo_dicts module may be useful.
d) Translate the longest ORF you generated in part (b) and perform a BLAST search. Search for the protein sequence (a blastp query). What gene is it?
e) [challenge] Modify your function to return the n longest ORFs. Compute the five longest ORFs for the Salmonella genome section we are working with. Perform BLAST searches on them. What are they?
a) Something was missing in the specification. Namely, what do we do if there are two ORFs of the same longest length? Do we return the first one, second one, or both? I am arbitrarily choosing to return the one with the 3$'$-most starting index.
Looking ahead to part (e), I will first write a function to return all ORFs that are not entirely included in a longer ORFs. For ease of storage and comparison, I will simply store the ORFS as the index of the start of the ORF and the noninclusive index of the last.
Let's now discuss the algorithm we'll use. There are more efficient ways of finding ORFs, but I will choose a very clear way. We'll first find all start codons. For each start codon, we will find the first in-register stop codon. If there is an in-register stop codon, we store this start-stop pair. At the end, we sort them, longest to shortest.
So, we really have three functions we'll use. find_all_starts(seq) will return the indices of all start codons in a sequence. find_next_in_register_stop(seq) will scan the seq and return the exclusive final index of the next in register stop codon. In other words, and ORF starting at index start is given by
seq[start:find_next_in_register_stop(seq)]
If there is no such codon, find_next_in_register_stop() returns -1. Finally, all_orfs(seq) returns the sorted tuple of 2-tuples containing the start/stop pairs of the ORFs.
In coming lessons, we will learn about test-driven development. I will use TDD principles for designing these functions, writing the test cases first.
def test_find_all_starts():
assert find_all_starts('') == tuple()
assert find_all_starts('GGAGACGACGCAAAAC'.lower()) == tuple()
assert find_all_starts('AAAAAAATGAAATGAGGGGGGTATG'.lower()) == (6, 11, 22)
assert find_all_starts('GGATGATGATGTAAAAC'.lower()) == (2, 5, 8)
assert find_all_starts('GGATGCATGATGTAGAAC'.lower()) == (2, 6, 9)
assert find_all_starts('GGGATGATGATGGGATGGTGAGTAGGGTAAG'.lower()) == \
(3, 6, 9, 14)
assert find_all_starts('GGGatgatgatgGGatgGtgaGtagGGACtaaG'.lower()) == \
(3, 6, 9, 14)
def test_find_first_in_register_stop():
assert find_first_in_register_stop('') == -1
assert find_first_in_register_stop('GTAATAGTGA'.lower()) == -1
assert find_first_in_register_stop('AAAAAAAAAAAAAAATAAGGGTAA'.lower()) == 18
assert find_first_in_register_stop('AAAAAACACCGCGTGTACTGA'.lower()) == 21
def test_all_orfs():
assert all_orfs('') == tuple()
assert all_orfs('GGAGACGACGCAAAAC') == tuple()
assert all_orfs('AAAAAAATGAAATGAGGGGGGTATG') == ((6, 15),)
assert all_orfs('GGATGATGATGTAAAAC') == ((2, 14),)
assert all_orfs('GGATGCATGATGTAGAAC') == ((6, 15),)
assert all_orfs('GGGATGATGATGGGATGGTGAGTAGGGTAAG') == ((3, 21),)
assert all_orfs('GGGatgatgatgGGatgGtgaGtagGGACtaaG') == ((14, 32), (3, 21))
We'll start with the find_all_starts() function.
def find_all_starts(seq):
"""Find all start codons in sequence"""
return None
And now we'll fail the test.
test_find_all_starts()
Now we'll write the function. I'll write is using the re modules which is a power string processing module that uses regular expressions. We covered this in bootcamp last year.
def find_all_starts(seq):
"""Find the starting index of all start codons in a lowercase seq"""
# Compile regex for start codons
regex_start = re.compile('atg')
# Find the indices of all start codons
starts = []
for match in regex_start.finditer(seq):
starts.append(match.start())
return tuple(starts)
And let's see if it passes the tests.
test_find_all_starts()
Yay! We passed! However, since we did not learn regular expressions this year, I will write a function that finds all start codons that does not use them.
def find_all_starts(seq):
"""Find the starting index of all start codons in a lowercase seq"""
# Initialize array of indices of start codons
starts = []
# Find index of first start codon (remember, find() returns -1 if not found)
i = seq.find('atg')
# Keep looking for subsequence incrementing starting point of search
while i >= 0:
starts.append(i)
i = seq.find('atg', i + 1)
return tuple(starts)
Now let's test this new find_all_starts() function
test_find_all_starts()
It passed! Yay!
Now, let's move on to the next function, which finds the first in-register stop codon. Again, we fail, and then write the function.
def find_first_in_register_stop(seq):
return None
test_find_first_in_register_stop()
Nice, beautiful failure. Now, we'll write the function and test it. Again, I'll demonstrate the power of the re module.
def find_first_in_register_stop(seq):
"""
Find first stop codon on lowercase seq that starts at an index
that is divisible by three
"""
# Compile regexes for stop codons
regex_stop = re.compile('(taa|tag|tga)')
# Stop codon iterator
stop_iterator = regex_stop.finditer(seq)
# Find next stop codon that is in register
for stop in stop_iterator:
if stop.end() % 3 == 0:
return stop.end()
# Return -1 if we failed to find a stop codon
return -1
And the test...
test_find_first_in_register_stop()
Great! It passes. Now, I'll write it without regular expressions.
def find_first_in_register_stop(seq):
"""
Find first stop codon on seq that starts at an index
that is divisible by three
"""
seq = seq.lower()
# Scan sequence for stop codon
i = 0
while i < len(seq) - 2 and seq[i:i+3] not in ('taa', 'tag', 'tga'):
i += 3
# If before end, found codon, return end of codon
if i < len(seq) - 2:
return i + 3
else: # Failed to find stop codon
return -1
Let's test this function to make sure it works.
test_find_first_in_register_stop()
Passage! Finally, we apply TDD to write all_orfs().
def all_orfs(seq):
"""Return all ORFs of a sequence."""
# Make sure sequence is all lower case
seq = seq.lower()
# Find the indices of all start codons
start_inds = find_all_starts(seq)
# Keep track of stops
stop_inds = []
# Initialze ORFs. Each entry in list is [ORF length, ORF start, ORF stop]
orfs = []
# For each start codon, find the next stop codon in register
for start in start_inds:
relative_stop = find_first_in_register_stop(seq[start:])
if relative_stop != -1:
# Index of stop codon
stop = start + relative_stop
# If already had stop, a longer ORF contains this one
if stop not in stop_inds:
orfs.append((relative_stop, start, stop))
stop_inds.append(stop)
# Get sorted list of ORF length
orfs = sorted(orfs, reverse=True)
# Remove lengths
for i, orf in enumerate(orfs):
orfs[i] = (orf[1], orf[2])
return tuple(orfs)
Now for the tests....
test_all_orfs()
Passage! We have succeed in generating an ordered list of the ORFs. Now, let's get what the problem specified, the longest ORF. Of course, we start with writing tests.
def test_longest_orf():
assert longest_orf('') == ''
assert longest_orf('GGAGACGACGCAAAAC') == ''
assert longest_orf('AAAAAAATGAAATGAGGGGGGTATG') == 'ATGAAATGA'
assert longest_orf('GGATGATGATGTAAAAC') == 'ATGATGATGTAA'
assert longest_orf('GGATGCATGATGTAGAAC') == 'ATGATGTAG'
assert longest_orf('GGGATGATGATGGGATGGTGAGTAGGGTAAG') == 'ATGATGATGGGATGGTGA'
assert longest_orf('GGGatgatgatgGGatgGtgaGtagGGACtaaG') == \
'atgGtgaGtagGGACtaa'
We'll fail them....
def longest_orf(seq):
return None
test_longest_orf()
We'll write our function, and then test it.
def longest_orf(seq):
"""Longest ORF of a sequence."""
orfs = all_orfs(seq)
if len(orfs) == 0:
return ''
else:
return seq[orfs[0][0]:orfs[0][1]]
test_longest_orf()
Passage! Success! We now have a reliable function for computing the longest ORF.
b) We simple use our new function to find the longest ORF of the Salmonella sequence.
# Compute it
salmonella_orf = longest_orf(seq)
# Look at it
salmonella_orf
c) We can use the codons dictionary in the bioinfo_dicts module to do the translation. With this in hand, we can write our translate() function. We will scan the DNA sequence, generate a list of amino acids, and then join them into a protein sequence.
def translate(seq):
"""Translate a DNA sequence into protein"""
# Make sure sequence is upper case
seq = seq.upper()
# Find start codon
i = 0
while i < len(seq) + 2 and seq[i:i+3] != 'ATG':
i += 1
# Translate until the stop codon or end of string
prot = []
while i < len(seq) - 2 and seq[i:i+3] not in ('TAA', 'TGA', 'TAG'):
prot.append(bioinfo_dicts.codons[seq[i:i+3]])
i += 3
return ''.join(prot)
d) We can now translate the protein
translate(salmonella_orf)
Doing a BLAST search on this protein indicates that it is a histidine kinase involved in signaling.
e) We already are computing all of the ORFs. We an therefore just add a kwarg to our longest_orf() function to get the n longest ones.
def longest_orf(seq, n=1):
"""Longest ORF of a sequence."""
orfs = all_orfs(seq)
if len(orfs) == 0:
return ''
elif n == 1 or len(orfs) == 1:
return seq[orfs[0][0]:orfs[0][1]]
else:
return_list = []
for i in range(min(n, len(orfs))):
return_list.append(seq[orfs[i][0]:orfs[i][1]])
return tuple(return_list)
Now, we'll compute the ORFs, translate them, and make a FASTA file to submit for a BLAST search.
# Compute ORFs
orfs = longest_orf(seq, n=5)
# Translate them
prots = []
for orf in orfs:
prots.append(translate(orf))
# Make a FASTA file
with open('sal_seqs.faa', 'w') as f:
for i, prot in enumerate(prots):
f.write('> {0:d}\n'.format(i))
f.write(prot + '\n')
We can take a look at it to see what I did with the above code.
!cat sal_seqs.faa
Upon doing the BLAST search, I found that the genes are:
| Length rank | Description |
|---|---|
| 1 | histine kinase |
| 2 | DNA rapair protein MutS |
| 3 | formate hydrogenlyase transcriptional activator |
| 4 | L-fucose isomerase |
| 5 | transcriptional regulator HilA (invasion regulator) |